59mm series tubular motor

Small size, light weight,good concealment,stable and durable;
Beautiful appearance, easy to operate, easy to install;
Torsion spring which can increase the lifting strength of the rolling shutter door, is optional;
Reserve power which avoids the shuttle not being open when the power is off,is option

Adjustment skills:

Adjust the upper limit first:

When the motor is powered on, first press the door open button on the remote control (usually the upper triangle) to watch the door run. If it is down, adjust the reverse switch of the controller to the other side (usually on the side of the controller).

The first situation: Now the door is moving upwards normally, and it stops before reaching the actual limit. This is the simplest situation. Insert the adjustment rod into the red hole, turn the adjustment rod in the direction of +, and the door will follow you. The adjustment rod of the control device keeps rising until it stops at a suitable position, and the upper limit adjustment is completed at this time.

There is another situation, what should I do if I press the remote control, but the motor can’t stop? At this time, first press the pause button of the remote control, then press the door close button of the remote control, stop the door in the middle position, and then insert the adjustment rod into the red hole , turn the adjusting rod in the direction of - sign, you can turn it a few more times, and then press the remote control to rise until the motor stops automatically. Stop rising and stop at a suitable position. At this time, the upper limit is adjusted.

Lower limit adjustment:

When the motor is powered on, first press the door close button on the remote control (usually the lower triangle) to watch the door run. If it is up, adjust the reverse switch of the controller to the other side, and the door will go down. If it is not there yet The ideal state stops, it is simple at this time, insert this white hole, turn the adjustment stick in the direction of + sign, the door will keep rising with your adjustment stick, stop at the proper position, and the lower limit is adjusted at this time .

There is another situation, what should I do if the remote control is pressed, but the electric door cannot be closed? At this time, first press the pause button of the remote control, then press the door close button of the remote control to stop the door in the middle position, and then insert the adjustment rod into the white hole. , turn the adjusting rod in the direction of - sign, you can turn it a few more times, and then press the remote control to rise until the motor stops automatically. Stop rising and stop at a suitable position. At this time, the upper limit is adjusted.

Tubular motor application:

Tubular motors are mostly used in electric rolling doors. The motor is hidden in the roll tube, and the transmission shaft is driven by electric rotation to realize the lifting of the shutter window. When it rises, the curtain winds on the reel, and when it falls, the curtain slides down along the inside of the guide rail. Through the control of the remote control, the curtain can be raised, stopped and lowered.

Typical used: 
Cross blower motors use on commonly Heater, Air cooling Fan etc
Volt(v)=110V-240v
Freq(HZ)=50/60HZ
Current(A)=0.18-0.43 based on different stator thickne
Input power on loading: From 13W to 36W based on different stator thickness
Torque: 60g. Cm to 120g. Cm based on different stator thickness